Crude Oil ( ) Brent Crude ( ) Natural Gas ( ) S&P 500 ( ) PHLX Oil ( )
 October 12, 2015 - 10:00 AM EDT
Print Email Article Font Down Font Up
ION Engineering Successfully Completes Pilot Scale Testing of Carbon Capture Technology at the National Carbon Capture Center

ION’s Proprietary Solvent & Process Technology Captured over 99% of CO2

ION Engineering, a leading carbon capture technology company, today announced that it has successfully completed the first pilot scale testing of its proprietary solvent and process technology for the removal of carbon dioxide (CO2) from large point sources including natural gas and coal-fired power plants. The project, managed and partially funded by the DOE Office of Fossil Energy’s National Energy Technology Laboratory (NETL) entailed approximately 1,200 hours of continuous testing at the 0.6 MWe (Megawatt equivalent) Pilot Solvent Test Unit (PSTU). The PSTU is located at the National Carbon Capture Center (NCCC), a state-of the-art test center owned by Southern Company and funded by DOE, in Wilsonville, Alabama. Throughout testing, ION captured over 99% of the incoming CO2 from the coal-fired facility’s flue gas, while maintaining stable process operation and meeting project objectives.

“We are delighted with the overwhelming success of our first pilot testing at an operating coal-fired power plant,” said Alfred (Buz) Brown, PhD, ION’s founder, Chief Executive Officer and Chairman. “ION was founded to dramatically improve the technology available for removal of carbon dioxide emitted into the environment and we are making tremendous progress in that endeavor. We are working to define the future of carbon capture as a cost-effective solution to reducing greenhouse gas emissions.”

Under this project, ION has developed process modeling capabilities to further predict how ION’s technology will perform under different process and operating conditions. One of the most important outcomes of the testing at NCCC was validation of the process model. Model validation provides ION the ability to accurately predict how their technology will perform at other facilities in the future. Pilot testing was completed in August 2015 and a full analysis and report will be completed in early 2016.

The Company plans to initiate the next phase of project testing in mid-2016. ION will test its solvent and technology process at the next scale, moving from a 0.6 MWe facility to the >10 MWe scale at an existing international test facility. Testing is expected to run through the end of 2016.

About ION Engineering

ION Engineering is commercializing novel, proprietary solvent and process technology for removal of CO2 from large point sources, including natural gas and coal-fired power plants, more efficiently than current commercial solutions. ION’s CO2 capture technology outperforms other available technologies while significantly reducing both capital and operating costs. ION is currently working with local and global partners to test its carbon capture technology with flue gas in commercial settings. Following the large scale pilot testing anticipated in 2016, the Company is targeting a larger commercial demonstration project beginning in late 2017. Find more information at

ION Engineering
Patrick Wheeler
Chief Financial Officer

Source: Business Wire (October 12, 2015 - 10:00 AM EDT)

News by QuoteMedia