Brilliant Light Power, Inc. Announces the Validation of the Generation of over a Million of Watts of Power in the Volume of a Coffee Cup from the Conversion of Water Fuel to a New Form of Hydrogen
Brilliant Light Power, Inc. (BrLP) announced today that it has
continuously generated over a million watts of power from a new primary
source until the cell vaporized from the intense heat. The power
released by the conversion of hydrogen atoms from water molecules into a
lower energy form called “Hydrino” or dark matter is manifest as
brilliant-light emitting plasma wherein the light is uniquely and
extraordinarily essentially all high-energy light in the extreme
ultraviolet. Using four cross-confirming methodologies, five validators
have confirmed over a million watts of plasma power developed by BrLP’s
so-called SunCell® at power gains of over 100 times the power
to ignite the Hydrino reaction, and at power densities higher than any
previously known energy source. Dr. Randy Booker, physics professor and
former Physics Department Chairman at University of North
Carolina-Ashville said, “The power was measured using two optical power
measurements involving three sophisticated spectrometers calibrated
against a National Institute of Science and Technology traceable
standard and two thermal methods involving a commercial calorimeter and
the rate of the rise of the water coolant temperature of the SunCell®.
All four methodologies cross-confirmed the production of megawatt scale
power that was continuous in the case of the SunCell® with
spectacular commercial potential. Moreover, the unique and
characteristic spectrum from the optical tests of essentially purely
high energy light emission over a predicted range confirms the hydrino
reaction as the source of the power.”
BrLP subsequently held an invitation demonstration event on June 28,
2016 for about 50 guests from industry and academia wherein BrLP
presented live demonstrations of the enormous power density and power
gain by multiple methods. BrLP also presented an engineered SunCell®
prototype having no moving parts that it believes is capable of
producing 125 kW of electricity. BrLP anticipates having field trials in
2017 supported by several current engineering firm and manufacturer
partners. It comprises refractory materials capable of the intense heat
wherein the SunCell’s® enormous power density heats a
blackbody radiator to incandescent temperatures to produce the effect of
thousands of halogen light bulbs, and the light is converted to
electricity with so-called concentrator photovoltaic cells that receive
the light from the blackbody radiator and operate at incident light
intensities of over one thousand times that of sunlight. Details of the
SunCell®, the BlackLight Process, the video and slide
presentation from the June 28, 2016 demonstrations, background theory,
journal publications, and other support materials are available on the
BrLP webpage (http://brilliantlightpower.com).
BrLP’s safe, non-polluting power-producing system catalytically converts
the hydrogen of the H2O-based solid fuel into a non-polluting
product, Hydrino, by allowing the electrons to fall to smaller radii
around the nucleus. The energy release is over 200 times that of burning
the equivalent amount of hydrogen with oxygen. Due to this extraordinary
energy release, H2O may serve as the source of hydrogen fuel
to form Hydrinos and oxygen. Moreover, the SunCell® is
compact, light-weight and autonomous with a projected capital cost of 1%
to 10% that of any other form of power. The anticipated cost is so low
that BrLP intends to provide autonomous individual power for essentially
all stationary and motive applications untethered to the grid or any
fuels infrastructure. Dr. Mills announced, “This is the end of the age
of fire, the internal combustion engine, and centralized power and
fuels.”
“The commercial potential for SunCell® technology is
enormous. The promise of a cheap, clean and unlimited source of electric
power is on the verge of commercialization. SunCell®
components are based on well-known technologies from electrical
lighting, photovoltaic, semiconductor, refractory and aerospace
industries, and use widely available materials. What is new is Brilliant
Light Power’s theoretical and experimental breakthroughs, protected by
patents and proprietary know-how. Albert Einstein is looking down,
smiling: I told you so, He does not play dice,” said Former World Bank
manager Gerhard Pohl. Dr. Joseph Renick, former Chief Scientist at
Applied Research Associates added, “It is understandable why even the
best of scientists have difficulty taking seriously that which has been
accomplished by Dr. Mills and his team at Brilliant Light Power because
of how completely it transforms our understanding of atomic and
molecular structure, dispels all of the strangeness associated with
quantum theory so cherished by quantum physicists and chemists and then
to boot delivers to mankind a new source of essentially unlimited
inexpensive clean energy. The novel techniques, materials and processes
developed by BrLP in the last few years are making this new source of
energy a reality for all of mankind. The rest, however painful it will
be for many in the natural sciences, will follow.”
One of the validators, Bucknell Professor Dr. Peter Mark Jansson PE
remarked, “An objective review of the progress BrLP has made over the
past decade in the development of their proprietary hydrogen-based
technology indicates that they have achieved an understanding of the
fundamental parameters that must be controlled to create a sustainable
and energetic reaction of their atomic hydrogen fuel and catalysts. They
have made landmark progress in creating demonstration devices that prove
the concept of their generation technology with promise of becoming
continuously operating prototypes in the near future. The creation of
these consistently replicable experiments where input power is
multiplied by 65 to 150 times is a remarkable achievement. The input
power for these respective experiments was 8.02 kW and 10.45 kW with
corresponding output power peaks reaching as high as 521 kW and 1.56 MW.
Although these energy bursts were on the order of 1 to 3 minutes in
duration I was able to observe a more continuous, sustainable reaction
experiment that lasted over 7 minutes, other validators were able to
observe operating SunCells® for over 30 minutes in duration.”
Dr. K.V. Ramanujachary, Rowan University Meritorious Professor of
Chemistry and Material Science, added that from his independent tests he
finds, “the developments truly impressive and extremely important. I
believe that the technology is amenable for making large-scale devices
as easily as a portable one. This is what makes it very attractive.”
Regarding the versatility of power and unsurpassed logistical
advantages, David Bennett, former Proterra CEO and former President of
Eaton Vehicle Group, Asia Pacific said, “Transportation technology has
relied on burning something – oil, coal, natural gas, for over a
century. The transition to alternative energy is often considered a
niche, futuristic, and even inconsequential solution. The SunCell®
presents the possibilities to make this transition to a new energy era a
reality.” He further emphasized, “The SunCell® is a
relatively simple system that catalytically converts water-based fuel
directly into brilliant light that is converted to electricity using
existing photovoltaic technology. Initial testing indicates mega-watt
power potential, which would radically transform energy technology. The
SunCell® presents a solution to the clean energy challenge of
our lifetime.”
About Brilliant Light Power
Brilliant Light Power, Inc. is the inventor of a new primary energy
source applicable to essentially all power applications such as thermal,
electrical, automotive, trucking, rail, marine, aviation, aerospace, and
defense. The BlackLight Process, the power source, is the process of
releasing the latent energy of the hydrogen atom by forming Hydrinos.
The SunCell® cell was invented by Dr. Mills to release this
energy directly as electricity from water as the only source of fuel.
Glossary:
BlackLight Process: A novel chemical process invented by Dr.
Mills causing the latent energy stored in the hydrogen atom to be
released as a new primary energy source.
Hydrino: Hydrinos are a new form of hydrogen theoretically
predicted by Dr. Mills and produced and characterized by BrLP. Hydrinos
are produced during the BlackLight Process as energy is released from
the hydrogen atom as the electron transitions to a lower-energy state
resulting in a smaller radius hydrogen atom. The identity of the dark
matter of the universe as Hydrinos is supported by BlackLight’s
spectroscopic and analytical results as well as astrophysical
observations.
SunCell®: The SunCell® comprises six
fundamental low-maintenance commercially available systems, some having
no moving parts and capable of operating for a decade or more: (i) a
start-up inductively coupled heater to first melt silver; (ii) a gas
injector to inject hydrogen derived from water and an injection system
comprising an electromagnetic pump to inject molten silver and a very
stable solid source of oxygen that reacts with the hydrogen to form the
hydrogen to Hydrino catalyst; (iii) an ignition system to produce a
low-voltage, high current flow across a pair of electrodes into which
the molten metal and fuel are injected to form a brilliant
light-emitting plasma; (iv) a blackbody radiator heated to incandescent
temperature by the plasma; (v) a light to electricity converter
comprising so-called concentrator photovoltaic cells that receive light
from the blackbody radiator and operate at light intensity of over one
thousand Suns; and (vi) a fuel recovery and a thermal management system
that causes the molten metal to return to the injection system following
ignition.
Photovoltaic or Solar Cell: Each cell comprises a flat panel of a
semiconductor material that exhibits the photovoltaic effect, a method
of generating electrical power by converting radiation such as solar
radiation into direct current electricity. Light absorption in the
semiconductor material creates energized charge carriers of opposite
polarity that are collected at corresponding negative and positive
electrode contacts on opposite sides of the flat panel to create a
voltage that can deliver power to an external load.
View source version on businesswire.com: http://www.businesswire.com/news/home/20160711005351/en/
Copyright Business Wire 2016